Owners often start with architecture and budget, then discover that the building they imagined belongs to a different regulatory category than the consultant they appointed. Dubai Municipality classifies engineering offices and contractors by the height of the buildings they are allowed to handle, and the classification follows the staff, experience and track record each company can prove. Choosing the right category on day one protects your timeline.
This guide translates the published rules into plain language. It covers what G+1, G+4 and G+12 mean, the categories in DM’s consultancy bylaw, the minimum technical staff for each, the link to the engineer test explained in our Dubai Municipality approvals hub, and the questions owners ask most.
Send us your plot details and floors. DAEM confirms the route, prepares the drawings and files through BPS. Start your DM approval.
What Do G+1, G+4 and G+12 Mean?
The notation counts floors above ground level. G stands for the ground floor, and the number after the plus sign is the number of typical upper floors. G+1 is a ground floor and one upper floor, the typical shape of a private villa. G+4 is a mid-rise building with four upper floors. G+12 is a taller residential or commercial building with twelve upper floors.
In practice, designers often add basements, podiums, parking levels or mezzanines. Those extra levels are described separately in the drawings, for example “B+G+4” or “G+1 podium plus ten floors”. The classification of a firm, however, is expressed through the floor counts in the bylaw, so always ask your consultant how DM will count your building.
CategoriesThe Dubai Municipality Classification Categories
Article 6 of the bylaw amended by Administrative Resolution No. 255 of 2021 divides building construction work into three categories:
First category
Works and projects consisting of buildings with an unlimited number of floors. This is the top class, reserved for the most experienced offices.
Second category
Works and projects consisting of buildings up to G+12 typical floors.
Third category
Works and projects consisting of buildings up to G+4 typical floors.
The published categories start at G+4. A G+1 villa falls inside the scope of an office or contractor classified for that category or higher, but the permit route and requirements depend on the building type. Ask DM or your consultant to confirm.
Engineers Each Category Must Employ
The schedule attached to the 2021 amendment sets minimum technical staff for each category. The numbers below summarise that schedule as published. Because Dubai issued Law No. 14 of 2025 to regulate engineering consultancy offices, check the latest requirements with Dubai Municipality before relying on any table, including this one.
| Category | Minimum engineers | Architect | Civil engineers | Track record |
|---|---|---|---|---|
| First: unlimited floors | 5 | 2 architects, 10 years’ design experience each | 3 civil engineers with 5 to 10 years’ experience | None listed |
| Second: up to G+12 | 3 | 1 architect, 7 years’ design experience | 2 civil engineers, 5 to 7 years’ experience | Ten building projects, three in G+8 to G+12 |
| Third: up to G+4 | 2 | 1 architect, 5 years’ design experience | 1 civil engineer, 5 years’ design and supervision | Ten building projects, three in G+3 and G+4 |
Three notes in the schedule apply to every category. Engineers must be members of the UAE Society of Engineers. They must have passed the technical tests prescribed in Dubai. And the numbers are minimums: DM may require additional engineers where project areas exceed the stated limits or where the works have several phases.
ConnectionHow the Engineer Test Fits In
The second note above is where the engineer test enters the picture. An office cannot count an engineer toward its classification unless that engineer has passed the prescribed technical tests. That is why hiring or training registered engineers directly affects the size of building an office can take. For the exam itself, read our guide to the Dubai Municipality exam for engineers, then the discipline routes for civil engineers, mechanical, electrical and architects.
ContractorsContractor Classification by Floors
Consultants are only half of the picture. Dubai Municipality also classifies contracting companies by the height and type of building they can execute, and the contractor must be registered before works start. Specialised sub-contractors may also be required for items such as fire protection and elevators. When you compare quotations, ask each contractor for its registration class and confirm that it covers the number of floors in your building.
Verify the class before signing
A low quotation from a company in a lower category is not a saving if DM will not accept it for your project. Check the register first.
Match consultant and contractor
The consultant and contractor classes should both cover the project. A mismatch can stop the permit or delay inspections.
Plan for changes
If you must replace a consultant or contractor during the works, DM has published procedures for replacement and for issuing completion certificates. Plan this early with your adviser.
From Category to Permit: The Steps
- Define the building. List floors, basements, use and plot area. This decides the category and the permit route.
- Appoint a registered consultant. Choose an office whose class covers the building and whose engineers hold valid registrations.
- Prepare coordinated drawings. Architectural, structural, MEP and fire drawings must follow the Dubai Building Code.
- Start external NOCs. Civil Defence, DEWA and RTA clearances run in parallel with the DM review.
- Submit through BPS. The consultant files in the Dubai Building Permit System and answers review comments.
- Appoint the contractor and build. The registered contractor executes the approved works, and DM inspects at the mandatory stages.
- Request completion. After final inspections DM issues the completion certificate so services can be connected.
Want one team from drawings to completion?
DAEM combines consultancy and execution: the engineers who design the works also oversee them.
G+4 vs G+12 vs Unlimited: What Changes?
| Factor | G+4 | G+12 | Unlimited floors |
|---|---|---|---|
| Building type | Low and mid-rise | Taller residential or commercial | Towers and landmarks |
| Engineers needed | 2 minimum | 3 minimum | 5 minimum |
| Experience level | Lowest threshold | Medium threshold | Highest threshold |
| Typical risk | Setbacks and parking | Fire strategy and structure | Complex systems and phasing |
The pattern is clear: every step up in floors raises the number of engineers, the years of experience and the complexity of coordination. Owners who plan to add floors later should select a consultant able to grow with the building, or budget for a replacement under DM’s procedures.
Common MistakesMistakes Owners Make With Building Categories
The most common mistake is choosing a consultant first and checking the category afterwards. Others include forgetting that basements and podiums affect the structural design, assuming a contractor’s trade licence is enough, and starting NOCs after the DM review instead of in parallel. Another is relying on a verbal promise: always ask for the registration class in writing and verify it on the register.
You can reduce these risks by reading our guides to the types of Dubai Municipality approvals, the building permit validity rules and the documents required for DM approval.
More practical reading is available in the DAEM news and guides, including our explainers on Civil Defence requirements and the DM inspection process.
ExamplesThree Quick Examples
A private villa, G+1
The owner appoints a registered consultant, completes the affection plan and title documents, files through BPS and later appoints a registered contractor. The key risks are setbacks, parking and fire safety details.
A mid-rise building, G+4
The consultant must fall in a category that covers G+4 or higher. The permit needs coordinated structural, MEP and fire drawings, and NOCs from Civil Defence and DEWA often drive the timeline.
A tower, G+12 or taller
The office and contractor must prove experience on comparable projects. Phasing, fire strategy and structural coordination need extra review time, and DM may ask for more engineers on large areas.
In each case the same logic applies: the building defines the category, the category defines the team, and the team defines how smoothly the permit moves. Owners who reverse that order often pay twice, once for the first appointment and again to replace a consultant that cannot take the project forward.
Questions to ask before you appoint a consultant
Ask which classification the office holds and for how many floors. Ask which engineers will sign each discipline and whether they hold valid registrations. Ask for examples of approved projects of the same height and use. Ask who will handle external NOCs, and who will respond to DM comments when the review starts. Finally, ask what happens if the design changes after approval, because modifications need their own permits and fees. Clear answers in writing are a good sign; vague answers are a warning.
DAEM Contracting answers those questions at the start of every project. We are an engineering consultancy and approvals contractor serving Dubai and Sharjah since 2016, and our named engineers review each discipline before anything is submitted. You can see how we work on our Dubai Municipality approved consultants page.
A few practical notes help owners avoid surprises. Keep every classification statement in writing, including the number of floors the consultant and contractor are registered for. Ask whether the office has handled DM reviews for buildings of the same height in the last few years, because recent experience matters when comments arrive. If the plan changes from G+4 to G+8 during design, pause and check the category again before the next drawing issue, since the answer may change who can lead the project.
Why DAEMHow DAEM Contracting Supports You
DAEM Contracting LLC is an engineering consultancy and approvals contractor serving Dubai and Sharjah since 2016, with its office in Ras Al Khor, Dubai. We do more than prepare submissions for building permits: the same engineers who design and file the works also oversee their execution, so we stay accountable from the first drawing review to the final approved result.
We build what we get approved
Fire systems, MEP works and fit-outs are designed, installed, inspected and completed by one accountable team, so nothing is handed off after the approval stamp.
Two-emirate track record
Our experience covers Dubai and Sharjah municipalities and Civil Defence, giving you one partner across both emirates.
We know why applications get rejected
Years of handling resubmissions help us identify common issues before an application is filed, which saves review cycles.
You can reach our team on +971 50 884 9955 or +971 4 225 5969, or read how we handle Dubai Municipality approvals from drawings to completion.
FAQFrequently Asked Questions
What does G+4 mean in Dubai?
G+4 means a ground floor plus four typical floors. Dubai Municipality uses floor counts to classify consultancy offices and contractors, so G+4 is a category that defines the largest building an office or company in that class may handle.
What are the Dubai Municipality classification categories?
For building construction, DM’s published bylaw lists three categories: first, buildings with an unlimited number of floors; second, buildings up to G+12; and third, buildings up to G+4.
How many engineers does a G+12 office need?
Under the schedule published in the 2021 amendment, the second category lists three engineers: one architect and two civil engineers, with stated experience levels. Confirm the current schedule with Dubai Municipality, because the framework has been updated.
Does a G+1 villa need a registered consultant?
Yes. In Dubai, building permit applications are submitted through a DM-registered consultancy and executed by a registered contractor, whatever the size of the building. Ask DM or your consultant which classification applies to your plot and building type.
Can I hire a G+4 contractor for a G+8 building?
No. A company classified for G+4 may only handle projects within that category. A taller building needs a consultant and contractor in a category that covers its number of floors.
Where can I verify a consultant or contractor?
Dubai Municipality publishes its register of consultancy offices and contractors on its website, and the Dubai Engineering Qualification System lets you verify practice permits and engineer certificates.
Conclusion: Choose the Category Before the Consultant
G+1, G+4 and G+12 are more than building descriptions: they decide who may design, submit and build your project in Dubai. Confirm the category, verify the consultant and contractor on the register, start NOCs early and keep your documents consistent. With the right team, your permit moves faster and your building starts on a solid footing.
Plan your building permit with DAEM
Tell us your floors and plot, and we will confirm the route, prepare the drawings and manage BPS.
Trusted source: Classification rules are published by the Dubai Government legal portal; check the latest requirements on Dubai Municipality (dm.gov.ae) before you appoint a team.

Comments are closed